The adhesive is designed for assembling Architectural Decor elements made of polyurethane and polystyrene foam to ceilings and walls of any material.
Doesn’t require Additional fixation.
Applicable for Interior and facade Works.
Hybrid polymers, mineral fillers, functional additives. Pasty mass of white color.
Allowable surface types:
any engineering surfaces (brick, cement, plaster, aluminum, stone, worked wood, PVC, glass, etc).
surface must be clean, dry, degreased and dust-free. Weak mineral surfaces must be strengthened with suitable primer.
Method of application:
remove dust from the surface with brush or cloth. Degrease if needed. Apply a band of adhesive on the item to be glued on, position the item on the surface, press hard against the surface and hold for 4-5 seconds. Full hardening takes 24.
ambient temperature -10°С or more for the duration of work and for next 24 hours. Relative air humidity 40% or more.
wash with white spirit immediately after the work.
24 months from the date of production in a sealed packaging in a dry and cool place, at temperatures between +5°С to +25°С. Freezing of the glue is allowed at temperatures not below -30°С with the following defrostation in a warm room without active heating with a drying fan, radiators, etc. (not more than 5 cycles).
in case of contact of glue with the eyes rinse them thoroughly and consult with the doctor immediately, as for the rest observe common industrial safety rules. Doesn’t require fixation after gluing